Aircraft Inspection Concepts and Techniques

Aircraft inspection is a critical part of aviation maintenance, ensuring that aircraft structures and components remain safe and airworthy. Inspections are performed to detect defects, damage, wear, or corrosion before they lead to failures that could compromise safety. Inspection methods range from basic visual checks to advanced nondestructive inspection (NDI) techniques. These methods allow technicians … Read more

Aeronautical Publications

Aeronautical publications are the sources of information for guiding aviation mechanics in the operation and maintenance of aircraft and related equipment. The proper use of these publications greatly aid in the efficient operation and maintenance of all aircraft. These include manufacturers’ SBs, manuals, and catalogs; FAA regulations; ADs; advisory circulars (ACs); and aircraft, engine, and … Read more

Inspection of Aircraft Welds

A discussion of welds in this post is confined to judging the quality of completed welds by visual means. Although the appearance of the completed weld is not a positive indication of quality, it provides a good clue about the care used in making it. A properly designed joint weld is stronger than the base … Read more

Introduction to Aircraft Inspection

Inspections are visual examinations and manual checks to determine the condition of an aircraft or component. An aircraft inspection can range from a casual walk around to a detailed inspection involving complete disassembly and the use of complex inspection aids. An inspection system consists of several processes, including reports made by mechanics, the pilot, or … Read more

Inspection of Composites

Composite structures are inspected for delamination (separation of the various plies), debonding of the skin from the core, and evidence of moisture and corrosion. Previously discussed methods including ultrasonic, acoustic emission, and radiographic inspections may be used as recommended by the aircraft manufacturer. The simplest method used in testing composite structures is the tap test. … Read more

Aircraft Routine/Required Inspections

For the purpose of determining their overall condition, 14 CFR provides for the inspection of all civil aircraft at specific intervals, depending generally upon the type of operations that they are engaged in. The pilot in command (PIC) of a civil aircraft is responsible for determining whether that aircraft is in a condition for safe … Read more

Nondestructive Inspection/Testing (Part 2)

Eddy Current Inspection Eddy Current Inspection Electromagnetic analysis is a term describing the broad spectrum of electronic test methods involving the intersection of magnetic fields and circulatory currents. The most widely used technique is the eddy current. Eddy currents are composed of free electrons under the influence of an induced electromagnetic field that are made … Read more

Nondestructive Inspection/Testing (Part 1)

The preceding information in this site provided general details regarding aircraft inspection. The remainder of this site deals with several methods often used on specific components or areas on an aircraft when carrying out the more specific inspections. They are referred to as nondestructive inspection (NDI) or nondestructive testing (NDT). The objective of NDI and … Read more

Aircraft Special Inspections

During the service life of an aircraft, occasions may arise when something out of the ordinary care and use of an aircraft could possibly affect its airworthiness. When these situations are encountered, special inspection procedures, also called conditional inspections, are followed to determine if damage to the aircraft structure has occurred. The procedures outlined are … Read more