Turbine Engines Troubleshooting

Turbine engine discrepancies can be either obvious or hidden. Hidden problems, when not detected and corrected, often cause major problems with continued engine operations. Hidden troubles are detected by continuously monitoring engine operating parameters, comparing them over time to detect subtle changes that indicate wear and transient problems. By analyzing engine trends and consulting the … Read more

Turbine Engine Calibration and Testing

Some of the most important factors affecting turbine engine life are EGT, engine cycles (a cycle is generally a takeoff and landing) and engine speed. Excess EGT of a few degrees reduces turbine component life. Low EGT materially reduces turbine engine efficiency and thrust. So, to make the engine highly efficient, the exhaust temperatures need … Read more

Aircraft Engine Structural Inspection

One of the best methods to double check your visual inspection findings is to supplement them with one of the forms of nondestructive testing, such as magnetic particle inspect, dye penetrate inspection, eddy current, ultrasound, and x-ray. Defects in nonmagnetic parts (aluminum parts) can be found by all these methods except for magnetic particle inspect, … Read more

Reciprocating Engine Reassembly

Before starting reassembly, all serviceable and new engine components need to be cleaned, organized, and laid out in the order they are to be assembled. A popular method of engine assembly is for the engine to be assembled at one work station with the same technicians completing the total assembly of the engine. It is … Read more

Aircraft Turbine Engine Ratings

The flat rating of a turbine engine is the thrust performance that is guaranteed by the manufacturer for a new engine under specific operating conditions, such as takeoff, maximum continuous climb, and cruise power settings. The turbine inlet temperature is proportional to the energy available to turn the turbine. This means that the hotter the … Read more

Aircraft Turbine Engine Shutdown

On turbine engines that have a thrust reverser, retarding the aircraft throttle to idle or power lever to OFF cuts the fuel supply to the engine and shuts down the engine. On engines equipped with thrust reversers, this is accomplished by means of a separate fuel shutoff lever or switch. When an engine has been … Read more

Aircraft Reciprocating Engine Cylinder Removal and Installation

Cylinder Removal Since these instructions are meant to cover all air-cooled engines, they are of a very general nature. The applicable manufacturer’s maintenance manual should be consulted for torque values and special precautions applying to a particular aircraft and engine. However, always practice neatness and cleanliness, and always protect openings so that nuts, washers, tools, … Read more

Aircraft Engine Maintenance and Operation

Proper engine maintenance and correct operating practices are essential for maintaining aircraft safety, reliability, and performance. Aircraft engines operate under demanding conditions involving high temperatures, pressures, and mechanical loads. Regular inspections, maintenance procedures, and operational checks are therefore required to ensure that engines continue to operate efficiently and safely throughout their service life. Reciprocating engines … Read more