Aircraft Drawings: Title Blocks, Number Systems and Standards

Aircraft drawings contain essential information used in the design, manufacture, assembly, inspection, and maintenance of aircraft and their components. To ensure that drawings can be identified, organized, and interpreted correctly, they use title blocks, drawing numbers, reference numbers, and standardized drawing conventions. Understanding these elements helps aviation maintenance technicians locate the correct technical information and identify the parts and materials required for aircraft work.

Title Blocks

Every print must have a means of identification. This is provided by a title block (Figure 1A). The title block contains a drawing number and other information concerning the drawing and the object it represents. This information is grouped in a prominent location on the print, usually in the lower-right corner. In some cases, the title block is arranged as a strip extending across much of the bottom of the drawing sheet.

Technical assembly drawing showing multiple components arranged in their relative positions to illustrate how they fit together to form a complete unit
Figure 1. Assembly drawing

Although title blocks do not follow a single standard layout, they generally contain the following information:

  1. Drawing number: Identifies the print for filing and retrieval and distinguishes it from other drawings.
  2. Name of the part or assembly: Identifies the object represented by the drawing.
  3. Drawing scale: Indicates the relationship between the dimensions on the drawing and the actual dimensions of the object.
  4. Date: Indicates when the drawing was prepared or issued.
  5. Name of the firm: Identifies the company or organization responsible for the drawing.
  6. Names of the drafting personnel, checker, and approving individual: Identifies the personnel involved in preparing, checking, and approving the drawing.

Drawing or Print Numbers

All prints are identified by a number that appears in a number block in the lower-right corner of the title block. The drawing number may also appear in other locations, such as near the top border, in the upper-right corner, or on the reverse side of the print at both ends. These additional locations help identify the drawing when it is folded or rolled.

The primary purpose of the drawing number is to allow quick and accurate identification of a print.

When a drawing consists of multiple sheets, the same drawing number may be used for all sheets. The number block then indicates the individual sheet number and the total number of sheets in the series (Figure 1B).

Reference and Dash Numbers

Reference numbers appearing in a title block direct the user to other related prints. They help identify drawings that provide additional information about a part, assembly, or system.

When more than one detail is shown on a drawing, dash numbers may be used to distinguish the individual parts. Each part has the same basic drawing number followed by a different dash number. For example, 40267-1 and 40267-2 identify two different items associated with drawing number 40267.

Dash numbers may appear in the title block or near the parts they identify on the drawing. They are also used to distinguish right-hand and left-hand parts.

In aircraft, many parts on the left side are similar to the corresponding parts on the right side but are reversed. In the numbering convention described here, the left-hand part is shown in the drawing, while the right-hand part is identified in the title block as the opposite part.

A notation above the title block may appear as follows:

470204-1LH shown; 470204-2RH opposite

This indicates that the left-hand part, number 470204-1LH, is illustrated, while the corresponding right-hand part is identified as 470204-2RH.

Both parts carry the same basic number, but the dash numbers distinguish them. Some drawing systems use odd dash numbers for left-hand parts and even dash numbers for right-hand parts.

Universal Numbering System

The universal numbering system provides a method of identifying standard drawing sizes. In this system, each drawing number consists of six or seven digits. The first digit is always 1, 2, 4, or 5 and indicates the drawing size.

The drawing sizes represented by these numbers are:

  • 1: 8½ × 11 inches
  • 2: 11 × 17 inches
  • 4: 17 × 22 inches
  • 5: A drawing with a width between 17 and 36 inches on a continuous roll

Letters are also used to identify standard drawing sizes, and their use has become increasingly common. The most frequently used letters are A through E.

LetterDrawing Size
A8½ × 11 inches
B11 × 17 inches
C17 × 22 inches
D22 × 34 inches
E34 × 44 inches

Additional sizes include D1, which is 24 × 36 inches, and E1, which is 30 × 42 inches. Other sizes are also available for larger formats and are generally reserved for inter-company operations.

The remaining digits identify the drawing. Many firms have modified this basic system to meet their own requirements. The letter or number indicating the standard drawing size may be prefixed to the drawing number and separated by a dash. Other numbering systems use a separate box before the drawing number to identify the drawing size.

In another variation, the part number of the assembly represented by the drawing is used as the drawing number.

Drawing Standards

Drawing standards establish common requirements for the preparation and interpretation of technical drawings. They cover items such as paper sizes, notes, numbering systems, geometric dimensions and tolerances, abbreviations, welding symbols, surface roughness symbols, and electrical symbols.

These standards address both metric and inch measurements, as well as computer-aided drafting practices. Different drawing standards are used across industries. Two commonly used standards organizations are the International Organization for Standardization (ISO) and the American National Standards Institute (ANSI).

The use of drawing standards helps ensure consistency and allows drawings to be interpreted correctly by designers, manufacturers, maintenance personnel, and other users.

Bill of Material

A bill of material (BOM) is a list of the materials and parts required to fabricate or assemble a component or system. It is often included on the drawing and is usually arranged in ruled columns.

A bill of material typically provides the following information:

  • Part number
  • Part name
  • Material from which the part is constructed
  • Quantity required
  • Source of the part or material

A typical bill of material is shown in Figure 1C.

On drawings that do not include a bill of material, the required information may be indicated directly on the drawing. On assembly drawings, each item is identified by a number enclosed in a circle or square. An arrow connecting the number to the item helps the user locate the corresponding entry in the bill of material.

Explore Related Topics →

Facebooktwitterredditpinterestlinkedinmail