Matter is the foundation, or the building blocks, of any discussion of physics. According to the dictionary, matter is what all things are made of; it occupies space, has mass, and is perceptible to the senses in some way.
According to the law of conservation of matter, matter cannot be created or destroyed in an ordinary chemical reaction, although it can change its physical or chemical state. When liquid gasoline vaporizes, mixes with air, and then burns, it might seem that the original liquid fuel has disappeared. Although it no longer exists in the form of liquid gasoline, its matter still exists in the form of gases produced during combustion.
Characteristics of Matter
Mass and Weight
Mass is a measure of the quantity of matter in an object. It is related to the number and types of particles that make up the object, including atoms and molecules. More specifically, atoms contain protons, neutrons, and electrons, each of which contributes to the object’s mass.
The mass of an object remains essentially constant regardless of where it is taken in the universe or whether its physical state changes. The mass of an object can be changed by adding or removing matter. Mathematically, mass can be stated as follows:
Mass = Weight ÷ Acceleration due to gravity
The acceleration due to gravity near the Earth’s surface is approximately 32.2 feet per second squared (32.2 ft/s²). An object weighing 32.2 pounds-force (lbf) under this gravitational acceleration has a mass of 1 slug.
A slug is a unit of mass that will accelerate at a rate of 1 ft/s² when a net force of 1 pound-force is applied. In other words, under standard gravitational acceleration near the Earth’s surface, a mass of one slug weighs approximately 32.2 lbf.
Weight is a measure of the gravitational force acting on the mass of an object. The more mass an object has, the more it will weigh under the Earth’s gravitational force.
An object can appear weightless even though gravity is still acting on it. When we view astronauts aboard the Space Shuttle, they appear to be weightless. Even though the shuttle is far from the Earth’s surface, the force of gravity has not completely disappeared.
The astronauts and the space shuttle are actually in a state of continuous free fall. Because they fall together at the same rate, the astronauts experience apparent weightlessness relative to the shuttle.
Mathematically, weight can be stated as follows:
Weight = Mass × Gravity
Attraction
Attraction is a mutual force acting between particles of matter that tends to draw them together. Sir Isaac Newton described this phenomenon through the Law of Universal Gravitation.
Newton showed how each particle of matter attracts every other particle. This gravitational attraction keeps people bound to the Earth and holds the planets in their orbits within the solar system.
Porosity
Porosity means having pores or spaces between particles where smaller particles may fit when a mixture takes place. This property is commonly associated with granular materials, which consist of or appear to consist of small grains or granules.
Impenetrability
Impenetrability means that no two objects can occupy the same space at the same time. Thus, two portions of matter cannot simultaneously occupy the same space.
Density
The density of a substance is its mass per unit volume. In some aviation and engineering applications, weight per unit volume, known as weight density or specific weight, is also used.
The unit volume selected for use in the English system of measurement is 1 cubic foot (ft³). In the metric system, it is 1 cubic centimeter (cm³). Weight density is therefore expressed in pounds per cubic foot (lb/ft³), while mass density is expressed in units such as slugs per cubic foot or grams per cubic centimeter (g/cm³).
To find the weight density of a substance, its weight and volume must be known. Its weight is then divided by its volume to find the weight per unit volume.
For example, the liquid that fills a certain container weighs 1,497.6 lb. The container is 4 ft long, 3 ft wide, and 2 ft deep. Its volume is 24 ft³ (4 ft × 3 ft × 2 ft).
If 24 ft³ of liquid weighs 1,497.6 lb, then 1 ft³ weighs 1,497.6 ÷ 24, or 62.4 lb. Therefore, the weight density of the liquid is 62.4 lb/ft³.
This is the weight density of water at 4 °C (Celsius), which is commonly used as a reference when comparing the densities of other substances. In the metric system, the density of water at this temperature is approximately 1 g/cm³.
The standard temperature of 4 °C is used as a reference when measuring the density of liquids and solids. Changes in temperature do not change the mass or weight of a fixed quantity of a substance under ordinary conditions, but they can change its volume through expansion or contraction, thereby changing its mass or weight per unit volume.
The procedure for finding density applies to all substances; however, it is necessary to consider pressure when finding the density of gases. Pressure is more critical when measuring the density of gases than it is for liquids and solids.
For a gas at constant temperature, its density increases in direct proportion to the pressure exerted on it. Standard reference conditions for measuring the densities of gases have traditionally been established at 0 °C and a pressure of 76 cm of mercury (Hg), equivalent to 760 mmHg or approximately 101.325 kPa. This is the average atmospheric pressure at sea level under standard atmospheric conditions.
Gas densities are commonly compared using specified reference temperature and pressure conditions.
Specific Gravity
It is often necessary to compare the density of one substance with that of another substance. For this purpose, a standard is needed. Water is the standard commonly used when comparing the densities of liquids and solids.
For gases, air is most commonly used as the reference, although hydrogen is sometimes used. In physics, the word “specific” implies a ratio.
Thus, specific gravity is calculated by comparing the weight of a definite volume of a given substance with the weight of an equal volume of water under the same conditions. It can also be calculated by comparing the densities of the two substances.
The following formulas are used to find the specific gravity of liquids and solids.
or
The same density-ratio principle is used to find the relative density of gases by substituting air or hydrogen for water.
Specific gravity is not expressed in units, but as a pure number or ratio. For example, if a certain hydraulic fluid has a specific gravity of 0.8, 1 ft³ of the liquid has 0.8 times the mass of an equal volume of water. Using the weight density of water as 62.4 lb/ft³, the hydraulic fluid weighs 62.4 × 0.8, or 49.92 lb per cubic foot.
Specific gravity and density are independent of the size of the sample under consideration and depend only on the substance being measured, provided the temperature and pressure conditions are the same. See Figure 1 for typical values of specific gravity for various substances.

A device called a hydrometer is used to measure the specific gravity of liquids. This device consists of a tubular glass float contained in a larger glass tube. [Figure 2]

The larger glass tube provides the container for the liquid. A rubber suction bulb draws the liquid up into the container. There must be enough liquid to allow the float to rise without touching the bottom.
The float is weighted and has a vertically graduated scale. To determine specific gravity, the scale is read at the surface of the liquid in which the float is immersed.
An indication of 1000 is read when the float is immersed in pure water. When immersed in a liquid of greater density, the float rises, indicating a greater specific gravity. For liquids of lesser density, the float sinks, indicating a lower specific gravity.
An example of the use of a hydrometer is measuring the specific gravity of the electrolyte (battery liquid) in an aircraft battery.
When a battery is discharged, the calibrated float immersed in the electrolyte will indicate approximately 1150. The indication of a fully charged battery is between 1275 and 1310. These values represent specific gravity readings of 1.150, 1.275, and 1.310, respectively.
The electrolyte in a discharged battery therefore has a density approximately 1.15 times that of water, while the electrolyte in a fully charged battery has a density approximately 1.275 to 1.310 times that of water.
